/*
2.8.0.0 Released with AppleWin 1.25

2.7.0.#
.33 Fixed: ASC range -- auto-define symbol name: T_####
.32 Fixed: DW range -- auto-define symbol name: W_####
.31 Fixed: DB range -- auto-define symbol name B_####
.30 Fixed: ASC overflowing sOpCodes in FormatOpcodeBytes()
.29 Added: Help for DB and DW
.28 Added: ASC so it disassemblies intertwined code and data correctly.
    Example:
        using Castle Wolfenstien.DSK
        BLOAD ^VOCAB
        ASC name1 17DA:17F5
.27 Added: DB address now auto-defines the symbol D_####
.26 Changed: DS to ASC because DS is used as "Define Space" assembler directive
.25 Fixed : DW address so that odd address work.
    i.e. DW NEXT1 801   // AppleSoft Basic Line#1 Pointer to Next line
.24 Added: TSAVE "filename" to save the text screen to file
    Default filename for 40 columns is: AppleWin_Text40.txt
    Default filename for 80 columns is: AppleWin_Text80.txt
.23 Fixed: Hang with Memory Move when memory ends at FFFF, i.e. 2000<FFFE.FFFFM
.22 Fixed: Hang with Memory Fill when memory ends at FFFF, i.e. F D000:FFFF 0
.21 Added: Help for BRK
.20 Moved: BRK and BRKOP now under HELP BREAKPOINTS
.19 Added: Shift-F7 will run the emulator at normal speed but with debugger breakpoints active!
.18 Added: Implemented BPIO -- currently is the same as BPM

2.7.0.17 Released with Applewin 1.20.0.0

.17 Fixed: HELP <category> wasn't displaying when category was one of: FLAGS, OUTPUT, WATCHES
.16 Fixed: WL was displaying number of watches
.15 Fixed: Memory Dump was over-writing watches.
.14 Added: Debugger display flag to update soft switches. (Related to .12)
.13 Fixed: Targets of PC instruction weren't displaying.
.12 Fixed: Fixed scrolling to only update the diasm window.
.11 Fixed: Breakpoints and Watches no longer disappear.
.10 Added: Watches now show (dynamic) raw hex bytes
    Changed: Lowered watches down from 16 to 8.

 .9 Fixed: Bookmarks weren't initialized to zero.
 .8 Added: New command PWD to display the current debugger directory.
    This is the directory used for scripts, loading/saving memory, and trace files.
    Currently the debugger uses the same directory that the last disk image was loaded from.
    It will have its own directory in a future version.
 .7 Fixed: Cleaned up display of soft-switches to show address.
 .6 Removed: Unused aliases.
    Reason: When a symbol table is specified with no args, the total # of symbols will be shown.
    SYMBOLS1, SYMBOLS2, SYM0, SYM1, SYM2, SYM3, SYM4, SYM5, SYM6 
 .5 Fixed: Increased console output height so that you can view all the SYMBASIC * output.
 .4 Added: Two aliases for Dos 3.3 and Prodos symbol tables
    SYMDOS
    SYMPRO
 .3 Added: Two new symbol tables added Dos 3.3 and Prodos.
    SYMDOS33 
    SYMPRODOS
 .2 Fixed: Fixed: Debug build of debugger force display all CPU info window wasn't calling DrawTargets()
 .1 Added: Soft Switches displayed in CPU info window


2.7.0.0 Released with Applewin 1.19.1.0


.33 Fixed: Define Address should be shown as Absolute mode, not Indirect Absolute mode.
    Example:
       U D000
       DA BASIC.FPTR D000:D081 // was showing as "da (END-1)" now shows as "da END-1"
.32 Fixed: n'th Search results were being displayed in dec, yet parser takes hex numbers.
    Example:
       SH D000:FFFF A9 00
       U @A // used to show 10th search result as 10:DE60, now 0A:DE60
.31 Fixed: Disasm list containing data address table was bailing on first possible match.
    Example:
       DA BASIC.FPTR D000:D080
       U D000 // was showing da STOP+1, instead of END-1
.30 Added: DA now works!  It is similar to DW except it does symbol lookups!
    (DW = Define Word.  DA = Define Address)
    Example:
       U D000
       DA BASIC.FPTR D000:D080
.29 Fixed: Pretty print DB2 DB4 DB8 without commas
.28 Fixed: DB2 DB4 DB8 DW DW2 DW4 now work/display properly.
    DB (Define Byte) shows bytes in big endian order.
    DW (Define Word) shows addresses (2 bytes) in little endian order.
    Example:
       U D000
       DB2 REV.FPTR D000:D080
       X
       DW BASIC.FPT D000:D080
       X
    Or for those minimal types who hate wasting screen real estate
        DW4 COMPACT D000:D080
        X
        DB8 RA8 D000:D080
        X
.27 Fixed: Don't do symbol look up for data bytes that don't request it. (Groundwork for Define Address)
.26 Changed: Code portability. Slowly remove the LPCTSTR taint of Windowisms.
.25 Fixed: DB DW custom data byte sizes weren't scrolling properly in the disasm view.
    Changed _6502_GetOpmodeOpbyte() to be aware of data bytes.
.24 Changed: 2.6.2.24 Changed: Tone-downed the alt. background cyan for the DATA window. C2, C3 -> C1,C2
.23 Changed: Increased number of lines for console output buffer (from 384 to 512)
.22 Changed: Re-enabled magenta/purple for warnings (i.e. symbol table disabled)
.21 Fixed: Missing GPL / copyright on some debugger files, updated year.
.20 Changed: Output of found symbol more table friendly.  Symbol table name displayed first.
    Example: SYM HOME     // <SymbolTable>:  $<Address> <Symbol>
.19 Changed: Unified format & colors for summary of symbol tables and symbol table names.
    A symbol table that has been disabled will display in purple / magenta.
    Example: SYM HOME     // 'Main' shown in yellow
    Example: SYMBASIC OFF
    Example: SYM
.18 Fixed: Search Results: Total summary line unified colors.
.17 Fixed: Search Results: The n'th result now using correct color (was command, now number decimal)
.16 Fixed: Search Results: The hex literal prefix '$' for target address results now colorized properly.
.15 Fixed: Search Results: Added space between results for better readability.
.14 Fixed: Help description for Save/Load parameter help was swapped.
    Example: HELP SYMMAIN
.13 Added: Can now enable/disable selected symbol table(s) !
    Example: SYMMAIN OFF
    Example: SYMBASIC OFF
    Note: If you need to search for symbols ON, OFF, CLEAR, use SYM. i.e. SYM ON.
.12 Fixed: Following symbol tables were all hard-coded to act on SYMMAIN
		SYMBASIC
		SYMASM
		SYMUSER
		SYMUSER2
		SYMSRC
		SYMSRC2
	Example: SYMBASIC CLEAR
.11 Added: Command line now accepts Indirect mode via ( )
    Example:  U (BRKV)
.10 Added: Pretty printing 'B' of all bytes treated as data.
.9 Fixed: Renamed ambiguous command 'DL' to 'B' to list all bytes being treated as data
          Renamed command: 'B' to 'Z' as an alias to treat byte(s) as data
.8 Fixed: Define Code 'X' wasn't removing entries
.7 Fixed: DATA1 was using call win setup for code, not data.
.6 Cleanup of command table to have the proper internal command enum.
		D      // CMD_MEM_MINI_DUMP_HEX_1 moved to alias section
		M1     // CMD_MEM_MINI_DUMP_HEX_1 moved to alias section
		M2     // CMD_MEM_MINI_DUMP_HEX_2 moved to alias section
		TEXT81 // CMD_VIEW_TEXT81         <- CMD_VIEW_TEXT8X
		TEXT82 // CMD_VIEW_TEXT82         <- CMD_VIEW_TEXT8X
		W      // CMD_WATCH               <- CMD_WATCH_ADD
.5 Added: Internal consistency checking for commands and their internal command enum.
.4 Fixed: Added custom assembler type and debugger disassembly display uses variable
          instead of always being hard-coded to Merlin directives.
.5 Fixed: Data disassembler help -- was using wrong command help offset due to wrong order of commands.
.3 Fixed: Assembler now accepts lower-case mnemonics
.2 Fixed: help for command '@'
.1 Added: new command: 'X' to Define Code 
    Remove address being treated as data
    X                    // uses address cursor is on
	X symbol             // uses address cursor is on
	X symbol address
.0 Added: new command "DB" to Define Byte / Pseudo Mnemonic / Assembler Directive
    DB                  // uses address cursor is on
    DB symbol           // uses address cursor is on
    DB symbol address
    DB symbol start:end
    Example:
       DB zp 0:ff
2.6.2.0 Released with AppleWin 1.17.2.0

2.6.1.x
.35 Fixed: Pressing enter on blank line while in assembler wouldn't exit it.
.34 Fixed: Scrolling past top of the console output wouldn't draw blank lines
.33 Added: While there is console input, can use Page Up, Page Down to scroll the console output buffer.
.32 Added: Pressing Enter on a blank line now toggles the full screen console.
    "Blame" Nick for this great idea. :-)
    You can still use Ctrl-` if need be.
.31 Added: Help examples for Memory Fill
.30 Fixed: Memory Fill
	F start end value
	F start,len value
	F start:end value
.29 Removd: Old unassembly alias MDC
.28 Added: Can now toggle display of disassembly address on/off for a clean "source assembly" style
    Three way state
    1) "addr: ..."
    2) ": ..."
    3) " ..."
.27 Fixed: help for memory fill no longer displays help for flags
.26 Added: Was missing help for memory move
.25 Changed: Cleaned up help calc text
.24 Changed: Undid .5, .7 hack
.23 Extended entering memory bytes to allow 16-bit values
    0:4C FF69 
.22 Renamed breakpoint commands
	BC  -> BPC
	BD  -> BPD
	BPE -> BPEDIT
	BE  -> BPE
	BL  -> BPL
.21 Fixed: Trying to set zero page and other memory locations that
    were also commands, didn't update memory.
    A:##
	D:## // no longer shows mini dump starting at address 0
	F:##
    BC:##
    BD:##
    BE:##
    E8:##
    E16:##
.20 Added: Implemented Memory Move commands: MM and classic Apple Monitor style
    2001<2000.3FFFM
    M 2001 2000:3FFF
.19 Fixed: Added how to delete symbols to symbol help
.18 Added: Loading duplicate symbols at start-up now listed
.17 Added: When the debugger starts, attempts loading of additional symbol tables
	A2_BASIC.SYM
	A2_USER1.SYM
	A2_USER2.SYM
	A2_SRC1.SYM
	A2_SRC2.SYM
    Repsectively for basic, user1, user2, source1, and source2
.16 Added: In addition to !, can now use ~ to remove a symbol
     symbasic aCold.reset = F128
     symbasic aWarm.reset = D43C
     symbasic ! aCold.reset
     symbasic ~ aWarm.reset
.15 Fixed: Color coded when symbol address is updated.
.14 Fixed updating of symbols to use correct symbol table 
.13 Added: Wildcard suport to dump symbol table(s)
     symbasic Acold.reset = F128
     symbasic Awarm.reset = D43C
     symbasic *
.12 Added: Moved assembly symbols into own symbol table.
    Added: New command to reference assembly symbol table.
     symasm MyFirstAssemblyProgram = 300
.11 Added: Applesoft/Basic symbol table.
     symbasic Acold.reset = F128
     symbasic Awarm.reset = D43C
.10 Added: Split 'user' symbols into user1, and user2
.9 Added: Split 'source' symbols into source1, and source2
.8 Added: Applesoft symbols.  Thank-you Bob Sander-Cederlof !
.7 Fixed: renamed assembler command A to AS (as a work-around for:  A:##)
.6 Fixed: renamed mem fill command F to MF  (as a work-around for:  F:##)
.5 Fixed: renamed mem dump command D to MD  (as a work-around for:  D:##)
.4 Fixed: renamed mem enter word command EW to MEW, E16 to ME16
.3 Fixed: renamed mem enter byte command E  to MEB
.2 Fixed: renamed mem enter byte command EB to ME8
.1 Fixed: removed mem enter byte command E8

2.6.0.8 Released with AppleWin 1.16.1

=======
2.6.1.x
.32 Added: Pressing Enter on a blank line now toggles the full screen console.
    "Blame" Nick for this great idea. :-)
    You can still use Ctrl-` if need be.
.31 Added: Help examples for Memory Fill
.30 Fixed: Memory Fill
	F start end value
	F start,len value
	F start:end value
.29 Removd: Old unassembly alias MDC
.28 Added: Can now toggle display of disassembly address on/off for a clean "source assembly" style
    Three way state
    1) "addr: ..."
    2) ": ..."
    3) " ..."
.27 Fixed: help for memory fill no longer displays help for flags
.26 Added: Was missing help for memory move
.25 Changed: Cleaned up help calc text
.24 Changed: Undid .5, .7 hack
.23 Extended entering memory bytes to allow 16-bit values
    0:4C FF69 
.22 Renamed breakpoint commands
	BC  -> BPC
	BD  -> BPD
	BPE -> BPEDIT
	BE  -> BPE
	BL  -> BPL
.21 Fixed: Trying to set zero page and other memory locations that
    were also commands, didn't update memory.
    A:##
	D:## // no longer shows mini dump starting at address 0
	F:##
    BC:##
    BD:##
    BE:##
    E8:##
    E16:##
.20 Added: Implemented Memory Move commands: MM and classic Apple Monitor style
    2001<2000.3FFFM
    M 2001 2000:3FFF
.19 Fixed: Added how to delete symbols to symbol help
.18 Added: Loading duplicate symbols at start-up now listed
.17 Added: When the debugger starts, attempts loading of additional symbol tables
	A2_BASIC.SYM
	A2_USER1.SYM
	A2_USER2.SYM
	A2_SRC1.SYM
	A2_SRC2.SYM
    Respectively for basic, user1, user2, source1, and source2
.16 Added: In addition to !, can now use ~ to remove a symbol
     symbasic aCold.reset = F128
     symbasic aWarm.reset = D43C
     symbasic ! aCold.reset
     symbasic ~ aWarm.reset
.15 Fixed: Color coded when symbol address is updated.
.14 Fixed updating of symbols to use correct symbol table 
.13 Added: Wildcard suport to dump symbol table(s)
     symbasic Acold.reset = F128
     symbasic Awarm.reset = D43C
     symbasic *
.12 Added: Moved assembly symbols into own symbol table.
    Added: New command to reference assembly symbol table.
     symasm MyFirstAssemblyProgram = 300
.11 Added: Applesoft/Basic symbol table.
     symbasic Acold.reset = F128
     symbasic Awarm.reset = D43C
.10 Added: Split 'user' symbols into user1, and user2
.9 Added: Split 'source' symbols into source1, and source2
.8 Added: Applesoft symbols.  Thank-you Bob Sander-Cederlof !
.7 Fixed: renamed assembler command A to AS (as a work-around for:  A:##)
.6 Fixed: renamed mem fill command F to MF  (as a work-around for:  F:##)
.5 Fixed: renamed mem dump command D to MD  (as a work-around for:  D:##)
.4 Fixed: renamed mem enter word command EW to MEW, E16 to ME16
.3 Fixed: renamed mem enter byte command E  to MEB
.2 Fixed: renamed mem enter byte command EB to ME8
.1 Fixed: removed mem enter byte command E8

2.6.0.8 Released with AppleWin 1.16.1

>>>>>>> .r619
2.6.0.6 Released with AppleWin 1.15
.6 Added new command '@' to display the search results
.5 Fixed display results of Searching to be colorized
.4 Fixed ? to sort and colorize commands
.3 Fixed HELP to not include blank line
.2 Fixed 'G' to not send the Return of the command into the Apple Keyboard
.1 Renamed GO to G to not conflict with GR, GR1, GR2
.0 Added 18 new view output commands from inside the debugger!
   Added commands:
      TEXT, TEXT1, TEXT2
	  TEXT80, TEXT81, TEXT82
	  GR, GR1, GR2
	  DGR, DGR1, DGR2
	  HGR, HGR1, HGR2
	  DHGR, DHGR1, DHGR2
   Added aliases:
      TEXT40, TEXT41, TEXT42
   Example:
   F7 // enter debugger
   HELP VIEW // view help summary
   HGR // view current Hi-Res Screen. press a key to return to the normal debugger view

TODO: 2.6.0.0 released with next version of AppleWin (1.12.9.2)

.11 Added: Trace File Now displays filename tracing is saved to.
.10 Fixed: Trace File wasn't displaying assembly mnemonics
.9 Added: Internal change: Seperated Disassembling and Drawing a little more.
   See: GetDisassemblyLine() and FormatDisassemblyLine()
.8 Fixed: 100% CPU utilization polling for mouse events in debugger
.7 Added: Colorized PROFILE LIST output
.6 Fixed: Debugger mouse click not checking if in Debug mode
.5 Fixed: HELP WA wasn't displaying help for Watch Add
.4 Added: Colorized most of built in debugger help.
.3 Added: In disassembly, regs X & Y in mnemonic line are now color coded
.2 Changed internal representation of color console
.1 Console now jumps to end, when return pressed
2.5.7.0 Debugger using new Apple Font with color console support

.41 Fixed: Breakpoints now properly handle ranges (both relative and absolute)
   See HELP BPR
.40 Changed: Cleaned up Bookmarks, Watches, ZeroPage to be more consistent.
   Example:
   ZPA         // list
   ZPA CV      // add address
   ZPA 0 CV    // update with new address
   ZPA 0 CV CH // add/update a sequence
.39 Changed: Cleaned up many commands and HELP categories.
.38 Added: BMSAVE Bookmarks are now saved.
.37 Changed: Breakpoints now recognize op '!=' or '!' for not equal.
.36 Removed: Command Config menu (OPTION) since it is not needed
.35 Changed: Command CONFIG renamed to OPTION to prevent same name collision with category
.34 Fixed: The comment to end-of-line (//) is now a proper token 
.33 Fixed: Parsing of operators <= >=
.32 Fixed: HELP SYM displaying help category, not help command.
.31 Added: Mini-help for Watches
.30 Fixed: Command aliases are no longer displayed multiple times
	i.e. HELP BEN // would show BENCHMARK BENCHMARK (BENCH)
.29 Fixed: Removed hard-coded magic number spacing for Regs on info panel
.28 Fixed: Commands and params can now be in lowercase
.27 Fixed: Help now does partial matches. i.e. HELP OP
.26 Fixed: FONT checking wrong arg count - bug introduced when op * was added.
.25 Fixed: Console not handling string with length same as console width
.24 Added: HELP RANGE
.23 Added: HELP OPERATORS
.22 Fixed: Memory searching now accepts ranges. see HELP S, HELP SH
.21 Fixed: Updated BLOAD BSAVE Help
.20 Fixed: BLOAD, BSAVE now accept ranges.
.19 Fixed: Backspace toggles quote state for single quotes now too.
.18 Changed: Results of searching now start at 1, not zero.
	i.e.
	S F000,1000 'Apple'
	MA1 @1
.17 Added: HELP S
.16 Changed: Search Text (S) now uses consistent quoting
	"...ASCII..."
	'...High-Bit Apple Text...'
	Commands: Search Ascii (SA), and Search Apple Text (ST) are now deprecated.
.15 Fixed: Search Text wasn't allowing multiple apple text chars.
.14 Single Quoting now allows lower case input
.13 Fixed: Escape to clear console input, didn't reset quoted flag
.12 Changed: BLOAD failure now prints path/file it tried.
.11 Fixed: Memory Searching not handling comma seperating address,length
.10 Fixed: console not wrapping long lines
.9 Fixed: console resize not set to full width
.8 Fixed: PRINTF help
.7 Extended: command Bookmark List (BML)
	Also displays maximum bookmarks if no current bookmarks are set.
.6 Extended: command Breakpoint List (BL)
	Also displays maximum breakpoints if no current breakpoints are set.
.5 Extended: command Watch Add (W), and Watch List (WL)
	Also displays maximum watchpoints if no current watchpoints are set.
.4 Fixed: memory dump no longer overwrites icons when dumping SY6522 or AY8910
	MA1 SY
	MA1 AY
.3 Fixed: Target display bug
	_6502_GetTargets() Indirect (Zeropage) Indexed, Y not clamping pointer.
	F7
	DISASM POINTER 1
	R PC FAC7
	FE:55
	R Y FF
.2 Added: new command: DISASM POINTER [0 | 1]
	Toggles the display of the instruction's target pointer values on / off in the info panel.
	The default is now off, since the main disasm window shows target values for indirect addressing modes.
.1 Added: Increased breakpoints to 15, Watches to 6, Zeropage pointers to 6.
   Fixed: Display only active breakpoints.
.0 Rearranged/Reorganized info panel to allow full width console
	- Regs are now listed at the top of the window
	- Breakpoint title has been removed
	- Watch title has been removed
	- Target now shares space with the stack display
	- Memory Dump 2 is now only 2 lines
2.5.6.x

.4 Added: Help Categories: BOOKMARKS, HELP, OUTPUT
.3 Re-organized output commands into seperate category.
	ECHO, CALC, PRINT, PRINTF
.2 Added: Bookmark commands
	BM
	BMA # address   // Bookmark add
	BMC * | # [, #] // Bookmark clear
.2 Added: new console output commands: PRINT, PRINTF
.1 Fixed: '*' operator being treated as operator if only argument
2.5.5.0 Added multiplication operator: '*'

.15 Fixed: Help Category comma syntax parsing
.14 Fixed: BP comma syntax parsing
.13 Fixed: BSAVE comma syntax parsing. Comma after filename is mandatory now.
	BSAVE ["Filename"], addr, len 
.12 Fixed: BLOAD comma syntax parsing. Comma after filename is mandatory now.
	BLOAD ["Filename"], addr[, len] 
.11 Fixed: Go syntax parsing
	G StopAddress [SkipAddress,Length]
.10 Changed: internal parsing of comma operator.
	It is now left in the command arguments.
.9 Fixed: modifier keys (Shift,Ctrl,Alt) not being updated when mouse scrolling.
.8 Changed scrolling page up & down to not scroll as far.
.7 Fixed: scroll up bug, introduced with new scroll up code
   R PC FBB4
   up arrow
.6 Fixed: scrolling page up & down, to keep better sync
	U F700
	pagedown
	pageup
.5 Fixed: scrolling page up & down bug, loosing sync of disassembly lines
	U F500
	pagedown
	pageup
	F500...F526 -> F523 (should be F526, +20 lines)
.4 Fixed: scroll down bug, loosing sync of "top" disassembly
    U F70F
    down arrow
.3 Fixed: scroll up bug, loosing sync on disassembly by skipping a mnemonic line:
   i.e.
    U FA44 (FA56)
	up arrow
.2 Added: Ctrl-# to jump to address
.1 Added: Alt-# to set bookmark at address
.0 Added: mouse wheel scrolling in debugger
2.5.4.x

.16 Swapped -> and Alt ->
   -> Follow Target at Cursor
   Alt -> Jump Cursor to PC
.15 Added: Alt -> to follow target at cursor
.14 Fixed: BLOAD/BSAVE to update console.
.13 Changed: BLOAD/BSAVE to use more traditional order of arguments:
    The comma after the filename must be left out for the time being.
	BSAVE "Filename" address,length
	BLOAD "Filename" address
.12 Fixed: BPA to set breakpoints if no args
.11 Fixed: Cleaned up HELP BP
.10 Fixed: Cleaned up HELP BREAKPOINTS
.9 Fixed: Cleaned up HELP DISASM
.8 Added: DISASM to print current states
.7 Added: DISASM TARGET [#]
.6 Added: BLOAD addr[,len] "Filename"
.5 Added: BSAVE addr,len "Filename"
.4 Added: HELP DISASM
.3 Added: DISASM [BRANCH | COLON | OPCODE | SPACES] #
.2 Fixed: HELP CONFIG not working
.1 Linards put undocumented mnemonics in lowercase
2.5.3.x

2.5.2.x

3.0 Added: Ctrl-V (paste) now works.
2.0 Added: BRKOP ## support
2.5.1.0 Added: BRK ON|OFF support

.23 Fixed: Moved columns of disasm for instructions, and target values over one char left, to leave whitespace past the target 'char' on the end
.22 Added: Disasm window now shows target values for indirect, and indexed addressing modes.
    i.e.
0:34 12 00 00 AA 99
D0:16 03
1234:56 78 9A
R X D0
R Y 2
300:A9 55      // LDA #$55
302:4C 89 67   // JMP $6789
305:AD 01 00   // LDA $0001 = 12
308:A5 00      // LDA $00 = #34
30A:DE 00 00   // DEC $0000,X $D0=FF
30D:BE 02 00   // LDX $0002,Y
310:B4 35      // LDY $30,X
312:B6 00       // LDX $00,Y $02=0
314:D0 02
316:A1 00      // LDA ($00,X)
318: 7C 00 00  // JMP ($0000,X)
31B:B1 00      // LDA ($00),Y
31D:B2 00      // LDA ($00)
31F:6C 02 00 // JMP ($0002) = ($0000) -> 1234

.21 Fixed: Disasm display of "Zeropage, X" and "Zeropage, Y" targets weren't wrapping on the zero-page.
.20 Added: Single quoted chars in search are treated as opposite high-bit.
    i.e. S D000,FFFF "NEX" 'T' searches for NEXT, with the 'T' having the high-bit set.
    NEW: S search text or hex
    NEW: SA search ASCII text (single quote refers to Apple Text)
    NEW: ST search Apple text (single quote refers to ASCII text)
.19 Added: Search Results can now be (de) referenced via @
.18 Added: new operator '@'

.17 Fixed bug in _GetStartEnd(). i.e. D000,FFFF -> D000,CFFF (nothing searched!)

2.5.0.16 released with AppleWin 1.12.9.1

.16 Added: addr:byte [byte]
.15
.14 Fixed: Parses not to cook the args, until right before eating them
.13 Fixed: script to not append filename extension
.12 Fixed: command // to be comment
.11 Console sometimes wouldn't draw due to g_bDebuggerViewingAppleOutput being still incorrectly set to true
.10 Added: double forward slash on command line now ignores rest of command (same as C++ comment)
.9 Added: Legacy Apple "Monitor" Commands in ExecuteCommand()
	####G  (JMP $Address)
	####L  (Unassemble)
.8 Fixed: console input length not updated from script line length in CmdConfigRun()
.7 Fixed: script read hang in GetLinePointers()
.6 Fixed: Assembler storing one too many bytes in AssemblerPokeAddress()
.5 Fixed: Assembler not parsing target address in AssemblerGetArgs()
	A 40C7
	 BRA $40D7
.4 Fixed: Assembler hang in AssemblerProcessDelayedSymols()
	A 40C7
	 BRA $40D7
.3 Fixed: BPM to break ON the trigger, not after
	Cleaned up Breakpoint code
.2 Fixed: BP address[,Length] to re-direct to BPX
.1 Added: Search Hex
	SH Address,Len Byte [Byte ..]
	Wildcard support
	i.e.
		SH FA00,FF 20 ? ? 20
.0 Added: DISK # PROTECT [0 | 1]
.0 Added: DISK # EJECT
2.5 split Debugger files

.21 Changed: Branch indicator now a little bigger +3 in DebugInitialize() (easier to read), indented ^,V to make the < stand out
    U 300
    E 300 D0 80 D0 FE D0 00
.20 Added: BW is now a seperate color scheme
.19 Added: ECHO   CmdConfigEcho(), g_pConsoleFirstArg, and ArgsGet()
.18 Changed: BPX now defaults to setting breakpoint at cursor.
.17 Changed: BP now defaults to setting breakpoint at PC.

Patch 22
.16 fixed BPM. i.e. BPM C400,100.  Boot: ulti4bo.dsk, breaks at: 81BC: STA ($88),Y    $0088=$C480 ... C483: A0

Patch 21
.15 Fixed: CmdRegisterSet() equal sign is now optional. i.e. R A [=] Y
.14 Optimized: ArgsCook()
.13 Fixed: HELP "..." on ambigious command displays potential commands
.12 Added: Token %, calculator mod
.11 Added: Token /, calculator div
.10 Added: Token ^, calculator bit-xor
.9 Added: Token |, calculator bit-or
.8 Added: Token &, calculator bit-and
.7 Added: Mini-Assembler
.6 Added: MOTD (Message of the Day) : Moved from DebugBegin()
.5 Added: HELP SOURCE
.4 Fixed: SYMMAIN SYMUSER SYMSRC to now only search their respective symbol tables
.3 Added: _CmdSymbolList_Address2Symbol() _CmdSymbolList_Symbol2Address() now take bit-flags of which tables to search
.2 Added: EB alias for E
.1 Added: EW address value16  CmdMemoryEnterWord() to set memory with 16-Bit Values
2.4.2.0
.14 Added: SYM ! name to remove (user) symbol. _CmdSymbolsUpdate()
.13 Added: JSR address|symbol CmdJSR()
.12 Fixed: SYM address|symbol now reports if address or symbol not found. CmdSymbolsList()
.11 Fixed PageUp*, PagDn* not being recognized valid commands.

Patch 20
.10 Added: SYM2 symbolname = value
.9 Added: Undocumented command: FONT *
.8 Improved: FONT MODE # is now more accurate. i.e. U 301
   FONT MODE 0  Classic line spacing  (19 lines: 301 .. 313)
   FONT MODE 1  Improved line spacing (20 lines: 301 .. 314)
   FONT MODE 2  Optimal line spacing  (22 lines: 301 .. 316)
.7 Fixed: ArgsCook() wasn't parsing #value properly. i.e. CALC #A+0A
.6 Cleanup: DrawWatches()

Patch 19
.5 Fixed: ProfileSave() doesn't strip '%' percent signs anymore. Changed: fprintf() to fputs()
   Fixed: PROFILE RESET doesn't do dummy run of formatting profile data.
.4 Fixed: Exporting Profile data is now Excel/OpenOffice friendly.
          Zero counts not listed on console. (They are when saved to file.)

Patch 18
.3 Fixed: Help_Arg_1() now copies command name into arg.name
.2 Fixed: Temporarily removed extra windows that aren't done yet from showing up: WINDOW_IO WINDOW_SYMBOLS WINDOW_ZEROPAGE WINDOW_SOURCE
.1 Added: PROFILE LIST -- can now view the profile data from witin the debugger!
2.4.1 Added: PROFILE SAVE -- now we can optimize (D0 BNE), and (10 BPL) sucking up the major of the emulator's time. WOOT!
    Added: _6502GetOpmodeOpbyte() and _6502GetOpcodeOpmode()
.37 Fixed: Misc. commands not updating the console when processed

Patch 17
.36 Data window now shows text dump based on memory view set (ASCII or APPLE)
    MA1 D0D0; DATA;
    MT1 D0D0; DATA;
    D   D0D0; DATA;
.35 Renamed: ML1 ML2 to MT1 MT2 (Mem Text)
.34 Removed: MH1 MH2 (redundant MEM_VIEW_APPLE_TEXT)
.33 Fixed: Tweaking of Lo,Hi,Norm Ascii colors for Disasm Immediate & Memory Dumps
    ML1 D0D0; MH2 D0D0; U FA75
.32 Changed: Lo now maps High Ascii to printable chars. i.e. ML1 D0D0
.31 Ctrl-Tab, and Ctrl-Shift-Tab now cycle next/prev windows.
.30 Added: Up,Down,PageUp,PageDown,Shift-PageUp,Shift-PageDown,Ctrl-PageUp,Ctrl-PageDown now scroll Data window
.29 Added: DATA window now shows memory dump

Patch 16
.28 Fixed: MONO wasn't setting monochrome scheme
.27 Changed: Registers now drawn in light blue for both DrawSubWindow_Info() [DrawRegisters()] and DrawBreakpoints()
    Reg names in DrawSubWindow_Info no longer hard-coded: using g_areakpointSource[]
.26 Changed: DrawTargets() now shows Temp Address, and Final Address as orange (FG_INFO_ADDRESS)
.25 Changed: Flag Clear "FC" to "CL" (like 6502 mnemonic)
    Changed: Flag Set   "FS" to "SE" (like 6502 mnemonic)
    Added: Mirrored 6502 Mnemonics to clear/set flags as commands
    Moved: Legacy Flag Clear/Set commands "R?" "S?" to aliases
.24 Fixed OPCODE 2F: AM_INVALID1 -> AM_INVALID3
.23 Fixed OPCODE 0F: AM_INVALID1 -> AM_INVALID3
.22 Fixed: Shift-PageUp Shift-PageDown Ctrl-PageUp Ctrl-PageDown -> _CursorMoveUpAligned() & _CursorMoveDownAligned()
  Bug: U F001, Ctrl-PageDown
  Was using current disasm cursor address instead of top disasm cursor
.21 Fixed: _CursorMoveUpAligned() & _CursorMoveDownAligned() not wrapping around past FF00 to 0, and wrapping around past 0 to FF00
.20 Fixed: DisasmCalcTopFromCurAddress() causing bogus g_bDisasmCurBad when disasm invalid opcodes.
.19 g_aAddressingFormat[] -> g_aOpmodes[]
.18 Reverted .17 Changed StackPointer Input/Output. 'SP' is now back to 'S' (to be consistent with 6502 mnemonics)

Patch 15
.17 Changed StackPointer Input/Output from 'S' to 'SP'
.16 Fixed Go StopAddress [SkipAddress,Length] Trace() not working afterwards
.15 Added Info Regs color - Foreground and Background (orange)

Patch 14
.14 Added: Stack register now shows stack depth
.13 Bugfix: CmdBreakpointAddPC() operators now don't add extra breakpoints. i.e. BPX P < FA00
.12 Bugfix: DrawMemory() should draw memory byte for IO address: ML1 C000

Patch 13
NightlyBuild
.11 Disasm now looks up symbols +1,-1. i.e. U FA85, u FAAE
.10 Fixed '~' full console height
.9 Fixed: FindCommand() to update command found if not exact match
.8 Moved: Flag names from g_aFlagNames[] to "inlined" g_aBreakpointSource[]
.7 Extended: Calc to show binary values, and char is single-quoted
Nightly Build
.6 Bugfix: DrawTargets() should draw target byte for IO address: R PC FB33
.5 Extended: FONT "FontName" [Height]
.4 Extended: Go StopAddress [SkipAddress,Len]
.3 Added BPR F break on flag
   Added !     new breakpoint operator: NOT_EQUAL

Patch 12
.2 Fixed: FindCommand() and FindParam() now returns 0 if name length is 0.
.1 Fixed: CmdHelpSpecific() wasn't printing help for 1 argument set by other commands
2.4.0.0 added: uber breakpoints: BPR [A|X|Y|PC|SP] [<,<=,=,>,>=] address
.2 fixed: parsing console input to detect immediate values on operators '+', '-'
  You can now do register arithmetic:  CALC A+X+Y
.1 added: mini-calculator 'CALC'
2.3.2 Rewrote parsing of console input
 You can now do stuff like:
    BPA INITAN+3
    FONT "Lucida Console"

Patch 11
.19 fixed disasm: new color for disasm target address (orange)
	U FF14 shouldn't colorize ',X'
	U FF16 shouldn't colorize ',Y'
	U FF21 shouldn't colorze  'symbol,Y'
Addr should be purple or orange to verify is fixed
.18 fixed disasm: all indirects to do symbol lookup, and colorized '('...')' as operators
.17 added disasm: syntax coloring to immediate mode prefix '#$'
.16 fixed disasm window to work with proportional fonts
.15 fixed buffer-overun crash in TextConvertTabsToSpaces()

Patch 10
.14 fixed help CATEGORY & SPECIFIC not working properly
.13 fixed bug of CODE not removing CODE window split
.12 fixed split window bug of re-sizing console too large
.11 removed hard-coded height of 16 for line height in various Draw*()
.10 added alpha feature: SOURCE2 now shows source assembly listing in bottom half of window DrawSourceLine()
.9 added P [#] to step number of times specified
.8 added Up-Arrow, Down-Arrow to scroll console by one line in full screen console window
.7 Added source level debugger to buffer complete assembly source listing file
.6 Added help for MA#, ML#, MH#
.5 added 3rd symbol table: SRC
.4 Added: seperated console input color, console output color
.3 SYM now prints which symbol table the symbol was found in.
.2 Added "DFB" to add assembler variable to user symbol table
.1 Fixed FindAddressFromSymbol() and FindSymbolFromAddress() to search user symbol table first
2.3.1 Renamed all globals to conform to coding standard

.10 added TAB to move the cursor back to the PC, if there is no console input
.9 fixed bug of setting reg, always moving the cursor back the PC
.8 added detection if font is proportional.  Still doesn't draw properly, but slowly getting there.
.7 added colorized chars for regs, and memory ascii dump
.6 fixed console buffering BUG: ~,~,VERSION *
.5 added ~ to toggle full console on/off
.4 Fixed BUG: 'G' DebugContinueStepping() disasm window cursor getting out of sync:  R PC FA62; U FB40; G FB53
.3 Fixed spelling of CmdWindowLast()
.2 Added undocumented "VERSION *" to show the number of bytes in the disasm "window"
.1 Fixed BUG: CmdTrace() disasm window cursor getting out of sync:  Start, F7, PageUp, Space
2.3.0.0 Syntax coloring for the disassembler! Plus a fancy branch indicator to 'PR#6'!  Rock on!
38 Fixed FindParam() bug of skipping every other parameter
37 Fixed _PARAM_*_BEGIN _PARAM_*_END _PARAM_*_NUM
36 Added Regs A,X,Y to show character
35 Added syntax coloring for DrawBreakpoints()
34 Fixed DrawMemory() viewing memory ASCII to map control-chars to a printable glyph
33 Fixed 0 addr not working in CmdMemoryCompare()
32 Added BG_INFO_INVERSE, FG_INFO_INVERSE for flag hilighting
31 Changed FG_INFO_OPCODE color to yellow
30 Fixed MDC 0, bug in CmdUnassemble()with garbage address, due to var not init, and symbol lookup failed
29 Fixed typos in help summary, A, and D
28 Fixed Scrolling with and without g_bDisasmCurBad
27 Found bug -- can't scroll up past $5FFF with Tom's Bug Sample .. CmdCursorLineUp() not checking for gbDisamBad;
26 Code cleanup: still have some '#define's to convert over to 'const'
25 Fixed disasm singularity not showing up in DrawDisassemblyLine()
24 Fixed an disasm singularity in DisasmCalcTopFromCurAddress() i.e. F7, G FB53, then Space (to trace) once.
23 Fixed bug Watches not being cleared: _ClearViaArgs()
22 Code Cleanup: Moved most ExtTextOut() to DebugDrawText()
21 Changed End to jump $8000, due to redundant funcationality of Home, and wrap-around.
20 Added: DisasmCalc*From*()
19 New colors Enum & Array
18 implemented RTS. fixed RET to use common stack return address logic.
17 fixed console PageUp PageDn not refreshing console
.2 WINDOW_CONSOLE & 
   Implemented commands: MemoryDumpAscii*(): MA1 MA2 ML1 ML2 MH1 MH2
16 removed BOOL Cmd*(), replaced with UPDATE_*
15 New Console Scrolling
14 extended FindParam() to specify [begin,end]
13 added split window infastructure, added Window_e
12 fixed PARAM aliases
11 fixed FindParam() to allow aliases
10 fixed SYM1 CLEAR, SYM2 CLEAR not actuall clearing
9 fixed BufferOuput() in DebugBegin() clobbering first buffered output line
.1 since source level debugging is a minor feature
8 added command "VERSION *" to show internal debug info
7 fixed mem enter not refreshing screen
6 added source level debuggig back-end
5 fixed "SYM 0" bug

*/
