AppleWin history
================

This version of AppleWin is based directly on Oliver Schmidt's 1.10.4 source.

Bug reports and feature requests should be submitted here:
https://github.com/AppleWin/AppleWin/issues/new

Tom Charlesworth


1.27.2.0 - 12 Apr 2018
----------------------
. [Change #522] SSC: Support ACIA's TX Empty interrupt for both COM and TCP modes.
. [Change #311] SSC: Support ACIA's CTS/RTS.
. [Bug #308] Fixed TCP mode which was only generating an IRQ for first byte received.
. SSC: Fixed reading DIPSW registers.
. SSC: Support ACIA's Program Reset (write to register 9).
. SSC: Improved logging for unsupported modes (Echo, Tx break signal).


1.27.1.0 - 5 Apr 2018
---------------------
. [Change #547] Improve UI and logging when PrintScreen key fails to register.
. [Change #546] Changing Config's 'Disk access speed' now doesn't trigger a restart.
. [Change #540] Config's Benchmark now reports "Pure CPU MHz" for both video update (as before) & full-speed (new).
. [Change #535] Help doc: added a description of Caps Lock behaviour.
. [Change #398] Added new command line switches:
    -h1 <hdd> : Start with hard disk 1 plugged-in (and auto power-on the Apple II). NB. Hard disk controller card gets enabled.
    -h2 <hdd> : Start with hard disk 2 plugged-in. NB. Hard disk controller card gets enabled.
    -s7 empty : Remove the hard disk controller card from slot 7.
. [Bug #543] Swapping disks now doesn't swap drive's motor/spinning state.
. [Bug #537] Fix for failing DOS 3.2 INIT.


1.27.0.0 - 3 Feb 2018
---------------------
Full release that rolls-up all the changes and fixes from the 1.26.2 & 1.26.3 experiment builds.

Changes (misc):
. [Change #428] Added Config Input option to use PC Joystick 1 Thumbstick 2 for emulated Joystick 2
	- play Nick Westgate's updated Robotron using gamepads with two analog thumbsticks, eg. Logitech F310, PS4 DualShock 4, Xbox controller
. [Change #528] Improved logging to log when Apple2 type changes
. [Change #469] New -no-printscreen-key switch to prevent the PrintScreen key from being registered.
. Swapping disks while a drive is on now warns and prompts if you still wish to do this instead of silently failing with no feedback.
. [PR #441] Update zlib to latest version 1.2.11
. [PR #275] Attenuate speaker (and 8-bit DAC) output sample after 0.25s of inactivity
Full-screen:
. [Change #504] Full-screen: hide mouse pointer after 2 seconds of inactivity (and show again if mouse is moved)
. [Change #488] New -fs-height=<best|nnnn> switch.
    - best: picks the highest resolution where the height is an integer multiple of (192*2)
    - nnnn: select a specific resolution with height=nnnn pixels
    Use to select a better resolution for full-screen mode.
    NB. This changes the display resolution (and restores on exit).
. [Change #224] Added Config checkbox for 'Full-Screen: Show drive/keyboard status'
. [Change #492] UI fixes for full-screen & 2x windowed-mode
. [Bug #464] Fix for full-screen: bottom line missing when vertical resolution is 768
DiskII/Hard disk:
. [Change #323] Skip hard disk boot by holding down the Open-Apple key during an Apple II restart
. [Bug #525] Fix to prevent stepper motor changing track when drive is off
. [Bug #125] Support formatting of DOS3.3/ProDOS for .dsk/.nib in authentic/enhanced disk modes
	-  includes support for Pascal formatting (#196) and Ultima I formatting (#338)
. [Bug #499] Flush current track (if dirty) before 'Send to CiderPress'
. [Bug #452] Fix for unmounted HD now gives "NO DEVICE CONNECTED" (before gave "I/O ERROR")
. [Bug #389] Disk's write-protect detection mis-reporting when motor off
. [Bug #387] Support for 40-track .nib files
Peripheral cards:
. [Bug #514] Emulator restart (or reset) wasn't clearing any pending Mousecard interrupt
. [Bug #496] Support polling of Mockingboard's & Phasor's 6522 IFR.Timer1
. [Bug #486] Peripheral card's expansion ROM ($C800-CFFF, eg. SSC) wasn't being correctly restored from a save-state
  - Resulting in regression: Mousecard crash to monitor (#495).
. [Bug #423] Full support for INTC8ROM soft switch (fixes transient a2audit.dsk & Bejeweled failures)
. [Bug #418] Fix for slot-3 ROM not returning floating bus when Uthernet card is enabled
. [Bug #413] Save-state: bug when saving >9 RAMWorks III 64K banks
. [Bug #386] SSC: Experimental support for 6551's DTR, DCD and DSR bits via -modem switch
  - ie. -modem is shorthand for passing -dtr -dcd -dsr
  - Experimental support for 6551's control bit: DTR via -dtr switch
  - Experimental support for 6551's status bits: DCD and DSR via -dcd and -dsr switches
. [Bug #320] Mockingboard/Phasor: support 'inactive' function like real hardware
. [Bug #308] SSC ACIA Status register's interrupt bit not set when IRQ enabled and using TCP Port 1977
Debugger:
. [Change #483] Debugger: Shift+Left mouse button to toggle 6502 Status flag bits
. [Change #462] Debugger: Changed Left mouse button (LMB) to Shift+LMB to toggle display items
. [Change #406] Debugger: Support LC and MMU status & updated Help doc
. [Change #269] When stepping, ESC no longer exits back to debugger (use F7, Pause keys or Debugger button instead).
. [Change #217] Debugger G(o) command should use normal speed
. Debugger: Added new gg command:

	 command | run at normal speed? | run at full speed?       | video quality | sound quality
	-------------------------------------------------------------------------------------------
	   g     |         yes          | only if disk active, etc | precise       | precise
	   gg    |         no           | always                   | periodic      | muted

. [Bug #484] Debugger: Some corrections to APPLE2E.SYM
. [Bug #479, #476, #473] Debugger: Various UI and other fixes
. [Bug #460] Debugger: F2 whilst debugger active will immediately stop the drive spinning (allowing disk swap)
. [Bug #450] Persist debugger state across an F2 (reset machine state)
. [Bug #445] Debugger: BPM cmd: Support trigger on stack access for BRK,JSR,PLn,PHn,RTI,RTS
. [Bug #383] "Enhanced disk speed" is very slow when debugger is active
. [Bug #250] Debugger: When MODE_STEPPING, fix issue with disk LEDs staying on
Docs:
. [Change #477] Help doc: Document behaviour full-speed mode
. [Change #437] AppleWin.chm blocked from opening - delete the AppleWin.chm:Zone.Identifier ADS
. [Bug #417] Typos in Uthernet documentation
Fixes (other):
. [Bug #519] Support floating-bus in full-speed mode. Fixes Canyon Climber (#508), Oo-Topos (#532).
. [Bug #516] Internal video-mode was having PAGE2 permanently cleared (instead of just masked) when 80STORE was set.
. [Bug #456] Fix strange speaker clicks when changing configuration - DirectSound wasn't being uninitialised on a restart
. [Bug #415] Fix for not being able to select Pravets 82
. [Bug #409] Fix for AppleWorks 5.1 flickering when booting (latent bug from 2006!)
. [Bug #405] Screen flicker in full-speed mode
. [Bug #403] PrintScreen from Color TV or B&W TV video modes is missing top line
. [Bug #392] Fixes for a2audit.dsk
  - Resulting in regressions in LC support for Gemstone Warriors (#395), Quark Catalyst V3 and BeagleWrite (#400).
. [Bug #213] Pause not setting volume to zero


1.26.1.1 - 17 Feb 2017
----------------------
Fixes:
. [Bug #371] Flickery video when using GR from CP/M. (A regression at 1.26.0.x)
. [Bug #363] Debugger: Screen not updating when running in single-stepping debugger mode. (A regression at 1.26.0.x)
. Save-state: Fix for loading state when TEXT40 changes to TEXT80 or vice versa

Fixes since 1.26.1.0 (11 Feb 2017):
. [Bug #382] Reset not resetting the 40/80-col text mode for mixed-mode NTSC rendering


1.26.0.6 - 16 Oct 2016
----------------------
Changes:
. [Bug #126,#157,#194] Beta NTSC and cycle-accurate video support
	The new supported video modes are now only: TV Color, TV B&W, Monitor Color, Monitor B&W
	NB. The old 1.25 modes have been removed eg. "Color (TV Emulation)".
. Full-screen native resolution (no longer 640x480 resolution)
	NB. If your screen resolution is smaller than 1120x768, then you will get no scaling in full-screen.
. [Bug #260] Save-state file v2: human readable (Yaml-based format)
	All hardware configurations save/restored:
	. Apple model, sub-systems, memory, cards (except Uthernet and SAM cards)
	NB. Old v1 .aws file format are still loaded
. [Bug #270] Added SAM/DAC sound card support
. AppleWin built with VS2008 Express (supports Windows 2000 or later)
. Unit tests added for 6502 and 65C02 opcodes
. Added -load-state <savestate.yaml> command line option
. New repo created with test save-state images: https://github.com/AppleWin/AppleWin-Test
. Remove unsupported PC speaker sound types
. [PR #235] New start-up title screen by Paulo Garcia
. [PR #233] Configuration Dialog->Disk tab: Buttons replaced with drop-down menu for select/eject by Paulo Garcia
. Removed CTRL+F9 functionality to cycle through AppleWin's character sets (ie. original Apple II charsets and clones' char-sets)

Fixes:
. [Bug #129] Tight loop page-flipping causing heavy CPU load (fixed by NTSC / cycle-accurate video emulation)
. [Bug #204] Problem running Wrath Of Denethenor (fixed by NTSC / cycle-accurate video emulation)
. [Bug #317] [Disk] Only mounts version 1 .2mg not version 0
. [Bug #296] VS2015 unresolved external in Release
. [Bug #255] CyclesThisFrame not saved to save-state file
. [Bug #282] Timing test for undocumented AXA (zp),Y
. [Bug #288] Timing issue with DEC (abs)
. [Bug #278] 6502 emulation: bSlowerOnPagecross setup too late in CPP macros
. [Bug #271] Timing problems with ASL, INC and DEC (abs,X)
. [Bug #264] JMP (IND) is 5 cycles only - not 6 - on 6502
. [Bug #287] CPU emulation timing fixes
. [Bug #286] -d1 command line argument & declining GPL causes crash
. [Bug #277] SSI263 speech data-race leading to crash
. [Bug #267] Mousecard movement & button events not working in MODE_STEPPING
. [Bug #227] (Debugger)[1.25] AppleSoft symbol: COPY.FAC.TO.ARG.ROUNDED overflows into registers
. [Bug #246] (Debugger) Memory (Changing Memory) command in CHM help files
. [Bug #309] Silent Service hangs during Mockingboard use

Fixes since 1.26.0.5 (6 Oct 2016):
. [Bug #356] PrintScreen from Color TV or B&W TV video modes is missing top line

Fixes since 1.26.0.3 (19 Sept 2016):
. [Bug #341] Color Monitor mode (showing graphics) is shifted one HGR pixel to the right (losing the rightmost pixel)
. [Bug #353] Pravets 8M has a superfluous dot lit on the ']' character
. [Bug #352] Full-speed in mixed mode results in flickery video
. [Bug #351] In full-speed mode, listing a long BASIC program is barely faster than 1MHz mode 
. [Bug #350] Config -> '50% Scan lines' checkbox not working


1.26.0.0 (alpha) - Jan 2016
---------------------------
Changes:
. Alpha NTSC support


1.25.0.4 - 23 Apr 2015
----------------------
Fixes:
. [Bug #276] -d1 command line argument caused AppleWin to crash.


1.25.0.3 - 8 Sep 2014
---------------------
Note: This is the last planned version to support Win98/ME.
. The next release of AppleWin will be built with VS2008 Express, so will only work under Windows 2000 and later.

Changes:
. Changed the AppleWin project host from BerliOS to GitHub.
. [Feature #221] Restored F6 original behavior that was changed in v1.22.0.
     F6 Toggle full-screen / windowed mode.
     Ctrl-F6 Toggle windowed 1x/2x zoom.
. Ctrl-PrintScreen will copy the text screen (auto detect 40/80 columns) to the clipboard.
. [Feature #198] Alt-Enter toggles full screen.
. [Feature #199] Added a configuration option "Confirm reboot" to skip the F2 reboot confirmation.
. [Feature #201] Added display of current Track/Sector for the floppy drives.
  - In 2x window mode the status is displayed below the drive LEDs.
  - In full screen mode the status is displayed above the drive LEDS. The track/sector
    is shown only for the last drive accessed.
  Note: DOS3.3 Track/Sector status should be accurate.
        ProDOS support is preliminary -- the track/sector may show zero after an operation.
. Memory initialization defaults to a pattern of FF FF 00 00 (memclear 2).
. Added command line switch to specify the type of memory initialization pattern.
    -memclear #
  Where # ranges from 0 to 7.
  i.e.
     -memclear 0   Initialize memory to zero
     -memclear 1   Initialize memory to random values
     -memclear 2   Initialize memory to 4 byte pattern: FF FF 00 00 (default, same as v1.24.0)
     -memclear 3   Initialize memory to even pages FF, odd pages 00
     -memclear 4   Initialize memory to first half page 00, last half page FF
     -memclear 5   Initialize memory to first half page FF, last half page 00
     -memclear 6   Initialize memory to byte offset of that page
                   (current memory address low byte)
                   i.e. 00:00 01 02 03 ... for page $20
     -memclear 7   Initialize memory to page address
                   (current memory address high byte)
                   i.e. 00:20 20 20 20 ... for page $20
  NOTE: -memclear 6 can cause a few programs to NOT function correctly
        due to hidden bugs of programmers not correctly initializing memory or
        using uninitialized memory.  RNDL/RHND and $620B are initialized to
        allow Pooyan, and the Beautiful Boot game launcher to run, along with
        $BFFD..BFFF to allow Copy ][ v5 to boot correctly.
. Debugger (v2.8.0.0):
  - Added: TSAVE "filename" to save the text screen to a file.
    It will auto-detect the current video mode: 40/80 columns.
    Default filename for 40 columns is: AppleWin_Text40.txt
    Default filename for 80 columns is: AppleWin_Text80.txt
 - Changed: DS to ASC because DS is used as a common "Define Space" assembler directive
 - Added: Experimental "ASC" command to mark up data as Apple text.
    using Castle Wolfenstien.DSK
    BLOAD ^VOCAB
    ASC name1 17DA:17F5
 - Fixed: DB address now auto-defines the symbol D_#### if no symbol is given.
 - Fixed: DW address now auto-defines the symbol W_#### if no symbol is given.
 - Fixed: ASB address now auto-defines the symbol T_#### if no symbol is given.
 - Added: Help for DB and DW.

Fixes:
. [Bug #206] Pooyan would freeze due to RNDL/RNDH not initialized to non-zero values on
  a cold boot.
. [Bug #177] Full-screen under Windows8/8.1 would show a corrupt, pastel color palette.
. Debugger:
  - Hang with Memory Fill when memory ends at FFFF, i.e. F D000:FFFF 0
  - Hang with Memory Move when memory ends at FFFF, i.e. 2000<FFFE.FFFFM


1.24.0 - 11 Jan 2014
--------------------
Changes:
. Support cursor keys (in addition to numpad) when using keyboard for joystick emulation
. Support auto-fire for all 3 joystick buttons (via Config->Input)
. Debugger: Added "disk info" command
. Added confirmation message box for reboot (F2)
. [Feature #5715] Added -no-printscreen-dlg to suppress the warning if AppleWin fails to capture the PrintScreen key
. Changed save-state file persisted to Registry from filename to pathame
Fixes:
. [Bug #19154] ProDOS Order 2IMG crashing
. [Support #103098] Sometimes swapping disk could cause INIT to fail with ERROR #8


1.23.2 - 14 Sep 2013
--------------------
Changes:
. Added About dialog showing GPL (at startup, but only when AppleWin version changes).
. [Bug #18940] Extend BSAVE and BLOAD Command To Memory Banks 0 and 1
	Extended debugger BLOAD with bank support:
	. BLOAD [file],[bank:]address[,length]
	. BLOAD [file],[bank:]address[:end]
	. If no filename specified, will use last BLOAD or BSAVE filename.
	Extended debugger BSAVE with bank support:
	. BSAVE [file],[bank:]address,length
	. BSAVE [file],[bank:]address:end
	. If no filename specified, defaults to: '####.####.[bank##].bin'
		(where the form is <address>.<length>.bin)

Fixes:
. Fixed save-state bug for when 4K BANK1 is dirty (previously it would save the stale data instead).
. [Bug #18723,#19070] Mouse movement for CopyII+9.1 and ProTERM3.1.


1.23.0 - 26 Apr 2013
--------------------
RC for public release.

Changes:
. Extended logging support during startup and shutdown.
. Allow debugging of save-state image from start-up "logo" screen.
. Added Troubleshooting section to help file.

Fixes:
. Screenshot 280x192:
  - [Bug #018928] Correction for left edge loss of scaled scanline.
  - A screenshot in 50% scanline mode would produce an all black image.
. Fixed inserting of disk images from save-state when drive-2 contained the disk required for drive-1.


1.22.1 - 7 Mar 2013
--------------------
Changes:
. Make 2x the default
  - [Bug #018851] Refuse double-sizing the window unless the screen is large enough.

Fixes:
. [Bug #018886] MMU no good when no cards in slot-4 & 5
. [Bug #018852] WinXP: Switching 2x -> 1x video mode leaves old 2x data behind


1.22.0 - 1 Jan 2013
--------------------
Changes:
. [Feature #005557] Support DOSMaster image created by Apple Oasis.
. [Feature #003272 and #005335] Support 2x windowed mode:
  - Toggle between 1x and 2x by using Resize button (or F6).
  - Full screen now enabled by CTRL+Resize button (or CTRL+F6).

Fixes:
. [Feature #004346] Don't show mousetext for original Apple //e.
. Fixed HDD firmware to allow epyx_californiagames_iicplus.2mg to boot.
. HDD firmware: Added support for SmartPort entrypoint.
  - "Prince of Persia (Original 3.5 floppy for IIc+).2mg" now boots
. [Bug #018455] Improved rendering speed of debugger view.


1.21.1 - 12 Aug 2012
--------------------
Changes:
. [Feature #4399] Allow Z80 SoftCard to be inserted into slot 4 or 5. (Allows CP/M v3 to work)
. Reworked Configuration (property sheets) to allow multiple hardware changes.
. Updated Help .chm with info on No-Slot clock.

Fixes:
. Floating bus not returned for empty slot $Cnxx addresses. Fixes:
  - A2VGA.DSK: Apple][VGA card detection.
  - [Bug #018643] Mabel's Mansion.
. [Feature #005552] Mouse wasn't working for BeagleWrite / MultiScribe.


1.20.1 - 17 Jul 2011
--------------------
Fixes:
. [Bug #018242] Preserve drive's physical attributes (track, phase) when changing disk. (Fix for Platoon)


1.20.0 - 23 Feb 2011
--------------------
Changes:
. Standard, Text Optimized and Monochrome video modes now support half-pixel rendering accuracy!
. Colors tweaked to better match the real hardware.

Fixes:
. Fixed Mockingboard detection for Ultima III (ProDOS-8/harddisk version).

Debugger:
. See the Debugger_Changelog.txt for the various fixes and changes.

Misc:
. Updated acknowledgements. Cheers to Mike Harvey! (Nibble Magazine)


1.19.3 - 30 Dec 2010
--------------------
Changes:
. Set 50% scan lines as the default.

Fixes:
. Fix OpenFileName dialogs for Win98 (use older WinVer4 struct).
. Edits to the 'Printer dump filename' edit control are now recognised.


1.19.2 - 20 Dec 2010
--------------------
Changes:
. Added HD activity LED.
. Caps LED now takes up less space in full-screen mode.
. Debugger 2.7.0.0 (see Debugger_Changelog.txt)

Fixes:
. Fix for "APPLEWIN executed an invalid instruction" on Pentium II/266 CPU.
  - Rebuilt with Enhanced Instruction Set = Not Set (ie. no SSE/SSE2).


1.19.1 - 10 Dec 2010
--------------------
Changes:
. Rebuilt for Win98 with: VS2005 Express, Windows SDK 6.0, SAPI 5.1
. Improved detection of No-Slot-Clock accesses (GEOS now working).


1.19.0 - 28 Aug 2010
--------------------
Changes:
. Added No-Slot-Clock (located in $C300 ROM space).


1.18.2 - 17 Aug 2010
--------------------
Fixes:
. [Bug #017055] DDial timer running very fast.
  - TAPEIN.bit7 was being read from floating-bus. Now fixed high.
. [Bug# 007237] VBl IO reg not updated in 'Stepping' mode
. Loading save-state file (.aws) wasn't Win32-closing .dsk images in drives.


1.18.1 - 14 Feb 2010 (beta)
---------------------------
Changes:
. Added "-speech" cmd-line switch
  - Captures text from COUT and outputs to Speech API
  - Ctrl+RESET and FullSpeed mode (ie. disk access) will purge the speech buffers

Fixes:
. [Bug #16699] Debugger: G xxxx not clearing BP
. [Bug #16688] Debugger RUN <script-file> still not 100%
  - Honour absolute path (ie. don't prefix with CWD)


1.18.0 - 17 Jan 2010 (beta)
---------------------------
Changes:
. Added disk/harddisk image r/w support for .gz/.zip (and .2mg) files.
  - Multi-zip archives are read-only.
. Added disk/harddisk eject sub-menu to Disk Config tab.
. Removed .bin registration.

Fixes:
. [Bug #16632] Fix cmd-line -d1/d2 switches with relative path
. Fix speaker volume when booting with -d1 switch
. Fix debugger bugs:
  - Crash when doing: help *
  - [Bug #16651] Crash when doing: run <script-file>
. [Bug #16652] Fix "Harddisk images aren't persisted when in different folders"
. [Bug #12724,14747] Fix "Registry persisted Window x,y position sometimes off screen"


1.17.2 - 13 Dec 2009
--------------------
Changes:
. Enable XP visual themes & corrected tab order in the Configuration dialog - thanks to Joshua Bell
. Updated Help chm's Debugger breakpoint commands (BC,BD,BE,BL now replaced by BPC,BPD,BPE.BPL)

Fixes:
. Fix: Crash when COM or TCP port opened before Configuration dialog is opened for the first time
. Fix: Reading SSC DIP SW1 for "external" CLK (115.2K mode)
. Fix: Reinstated debugger's GO command:
  - G        : Go (Stepping Mode)
  - G <addr> : Go (Stepping Mode) until PC=addr


1.17.1 - 27 Nov 2009
--------------------
Changes:
. SSC: Support 115.2K Baud
. Dynamically generated 'Serial Port' drop-down menu
  - Save "Serial Port Name" to Registry (instead of drop-down menu index as "Serial Port")
. Updated Help chm's "Transferring Disk Images" - thanks to David Schmidt
. New switches: -log, -no-mb, -spkr-max, -spkr-inc
. Debugger (v2.6.2.0):
  - Added Applesoft BASIC symbols - thanks to Bob Sander-Cederlof
  - Return on blank line to toggle full screen console
  - Page Up/Down of console history while editing

Fixes:
. Fix for Speaker underflow problem (-spkr-max=200, -spkr-inc=20)
. Fix for SSC (big transfers): use queue instead of single byte buffer
. Don't hog CPU in PAUSED mode
. Implemented the shift key mod for II/II+. This fixes a problem with Homeword.
. [Bug #14879] Double-Lo-Res Graphics colors not correct


1.16.1 - 21 Jun 2009
--------------------
Changes:
. Ctrl-F2 now functions as CONTROL-RESET (same as Ctrl-Break)
. Video Mode now shown in Window Title
. 50% Scan Lines (can use Shift+Ctrl+F9 to toggle)
  - Added: Checkbox for "50% Scan lines" in the configuration tab, next to video mode
  - Supported by PrintScreen and Shift-PrintScreen
. Added command line "-noreg" to not register file extensions
. Added support for up to 40 track (160KB) disk images
. Debugger:
  - Symbols Length raised from 13 to 31
  - Pressing the Reboot button (F2) with breakpoints active, keeps the debugger running
  - symsrc is now relocatable, i.e. symsrc load "filename" [,offset]
    + Changes the address where debugger symbols are bound to by the offset (if specified)
  - Pressing Shift, Ctrl, or Alt, when viewing the current Apple output no longer kicks you back into the debugger.
    (Allows for Ctrl-Shift-F9, and Shift-F9 previewing.)

Fixes:
. Full screen drive LED status not showing up when floppy disks being accessed were set to read-only mode
. FLASHing 'S' in AppleII+ mode!
. Flash rate for NTSC
. Maximum volume bug when doubling-clicking a .dsk image to execute with AppleWin
. [Bug #14557] Loading serial port# from Registry (caused AppleWin to crash when booting Apple Pascal & other weird crashes)
. [Bug #15394] Audio under-run (set process priority to Above Normal when in non-Full Speed mode)


1.16.0 - 1 Feb 2009 (beta)
---------------------------
Changes:
. Support for Apple // Game Server via TCP (port 1977) : beta
. For GPL reasons, switched the following modules:
  - AY8910 (from MAME  to FUSE) : beta Mockingboard/Phasor
  - MC6821 (from MAME  to VICE) : beta Mouse card
  - Z80    (from Z80Em to VICE) : beta CP/M Softcard
. Printer support:
  - Printer dump filename
  - Filter unprintable characters
  - Append to print-file
  - Terminate printing after n seconds of idle
  - Encoding conversion for Pravets
  - Dump to printer (CAUTION! Enabled via command line switch: -use-real-printer)
. Added Pravets 8M

Fixes:
. BugID-014557: Fix for loading serial port from Registry (caused AppleWin to crash when booting Apple Pascal)
. Some floating bus bugs (fixes the Bulgarian game: "Walking in the town" & Annunciator read)
. FLASH rate (now 3Hz, was 6Hz)
. Fix for Willy Byte & MB support (strange 6522 behaviour!)


1.15.0.3 - 31 Aug 2008 (beta)
-----------------------------
Changes:
. Remembers the last disk images used for Drive 1 & 2
  - Is updated when you insert or remove a disk
. PrintScreen key now saves screen shots!
  - Saved in .bmp format in the last directory you opened a disk from.
  - The filename generated depends if a floppy disk is mounted:
      o no disk mounted: "AppleWin_ScreenShot_#.bmp"
      o use the last disk mounted: "{DiskFilename}_#.bmp"
  - default saves to 560x384 resolution.
  - Shift+PrintScreen will save a 280x192 .bmp
    Note: In case you are wondering about the non-standard resolution 560x384
      o Width is 560 in order to save double hi-res graphics, and
      o Height is 384 because we double the vertical scan lines to
        preserve the original aspect ratio using a 560 width.
  - To enable the dialog box display of the last file saved to,
    use the command line option: -printscreen
. Added new video mode: "Monochrome - Authentic"
  - Every odd scanline is black to replicate that authentic look of the Apple Green monitors
  - Similar to ApplePC's "Green monochrome" mode
. Debugger 2.6.0.6
  - Added new command '@' to re-display results of search, colorized.
    Example:
	  S F000:FFFF C050
	  @ // re-display search results
  - Renamed GO to G to not conflict with new commands GR, GR1, GR2
  - Added 18 new view output commands from inside the debugger!
      TEXT, TEXT1, TEXT2
	  TEXT80, TEXT81, TEXT82
	  GR, GR1, GR2
	  DGR, DGR1, DGR2
	  HGR, HGR1, HGR2
	  DHGR, DHGR1, DHGR2
    Example:
      F7 // enter debugger
      HELP VIEW // view help summary
      HGR // view current Hi-Res Screen. press a key to return to the normal debugger view
  - Added aliases:
      TEXT40, TEXT41, TEXT42
  - Fixed command 'G' to not send the Return of the command into the Apple Keyboard
  - Fixed command '?' to list commands sorted and colorized
  - Fixed command 'HELP' to not display extra blank-line
  
Fixes:
. '~' displayed instead of '^' 

Beta: CP/M support (Microsoft CP/M SoftCard in slot-5)
  - No save-state support
  - No Z80 debugging support

1.14.2.0 - 23 Jun 2008
----------------------
Changes:
. Support for Bulgarian clones: Pravets 82 & 8A
. Mouse can be configured to show/hide crosshairs; and can be restricted (or not) to AppleWin's window
. Added 'Send to CiderPress' function via the context menu of the drive buttons
. Added support for "The Freeze's" F8 ROM (Apple][ & Apple][+ only)
. Added -f8rom <rom-file> cmd line switch to allow loading a custom 2K Rom at $F800
. Support Shift-F9 to cycle backwards through video modes. 

Fixes:
. Mouse support for Contiki v1.3, Blazing Paddles & GEOS
. Mouse support now integrates much better with Windows (when in unrestricted mode)
. Extended HDD image file filter to include *.po
. [Bug #13425] Full Screen mode: drawing/erasing of the buttons on the RHS of the screen
. [Bug #12723] DOSMaster .hdv/.po images work
. [Bug #11592] Infiltrator now boots

1.14.1.3
--------
Beta builds for specific testers

1.14.1.2 PR - 20 Apr 2008
----------------------------
. Support for Pravets 82. Caps Lock serves as Lat/Cyr lock. The charset still needs a little fix (all characters have to be one row down).
. Some partial support for Pravets 8A. Caps Lock serves as Lat/Cyr lock, and F10 serves as Caps Lock.
In Pravets 8A mode the former behaviour of the F10 key is preserved as Ctrl+F10 (see Help/Keyboard for details).
Extended Basic and Miniassembler work, but there are still problems with the 8 bit charset (Парис [Parris] does not switch to latin characters).
Some keys have to be remapped, because currently they are not available (i.e. Э). There is still the problem that there is not enough space for this key on the keyboard.
. Added Send to CiderPress function via the popup menu of the drive buttons.

1.14.1.2 - 2 Dec 2007 (beta)
----------------------------
. Change: Removed crosshairs in mouse-mode
. Change: Hide Windows' mouse cursor when over Apple's screen (in mouse-mode)
. Change: Moved 'Mouse interface in slot 4' from Configuration to Input config page
. Added -f8rom <custom.rom> cmd line switch to allow loading a custom 2K Rom at $F800
. Added support for "The Freeze's" F8 ROM (Apple][ & Apple][+ only)
  - It's a non-autostart ROM (was used for cracking). Use 'C600G' command to boot floppy
  - It added extended output in the Monitor's 'L' command.
. Fix: Use mouse position delta (fixes GEOS)

1.14.1.1 - 13 Aug 2007 (beta)
-----------------------------
. Fix: Infiltrator (floating bus was not being returned for all unmapped I/O)
. Fix: Mouse card is now reset on a system reset (reboot from Fantavision to Dazzle Draw : 'no mouse installed' problem)
. Fix: CLEARMOUSE cmd was resetting the clamp value (Fantavision problem)

1.14.1.0 - 09 Aug 2007 (beta)
-----------------------------
. Fix: Mouse support in Contiki v1.3


1.14.0 - 08 Aug 2007 (beta)
---------------------------
Fixes:
. Super Serial Card: PR#2 & IN#2 now working
. Full support for Peripheral Expansion ROM (at $C800) & $CFFF access
. F2 (Power-cycle) when ROM is switched *out* caused Apple to freeze

Changes:
. Attempt to use drive1's image name as the name for the .aws file
. Added Apple//e (original 6502 version with "Venetian Blinds" self-test)
. Turbo mode via Scroll Lock (temporary or toggle mode) - selectable via UI

Beta:
. Mouse Interface card support in slot 4 (selectable via UI)
  - Full 6821 emulation & 2K ROM. Based on code by Kyle Kim (Apple in PC)
  - Tested with: Dazzle Draw, Blazing Paddles, Archon II: Adept, Orge[Fix], Dragon Wars


1.13.2 - 07 Apr 2007
--------------------
* Added: Apple ][ (non-autostart monitor)
* Added: 6502 NMOS illegal opcode support (for ][ & ][+)
* Added: 65C02 CMOS undefined opcode support (for //e)
* Added: Simple parallel printer support in slot-1
  . Creates (or overwrites) a file called "Printer.txt" in AppleWin.exe's folder
  . Eg. PR#1, then LIST, then PR#0
  . The file will auto-close 10 seconds after the last printed output
* Fix: [Bug #7238] FLASH support in 80-column mode
* Fix: [Bug #8300] 80-col text in Silvern Castle got corrupted
* Fix: Speech with MB/Phasor for short phonemes - bug in DirectSound in WinXP (see KB327698)
* Fix: Disk ][ track stepping (Mabel's Mansion now works)
* Docs updated (although debugger docs still partially out of date)
* Debugger:
  + Now uses Apple font
  + Can configure entry to debugger via specific opcode or illegal(6502)/undefined(65C02) opcode - use BRKOP cmd
    - So you can run Apple at full-speed until it hits your breakpoint (eg. BRK)
  + BRKOP, BRK # to enter debugger
  + Mouse support: button & wheel
  + BLOAD/BSAVE
  + Search command: S/SH
  + New DISASM command
  + bookmarks, via bm, bma, bmc, bml, ctrl-#, alt-#
  + HELP RANGE
  + HELP OPERATORS
  + PRINT, PRINTF
  + ctrl-v (paste) support
  & lots more (doc's to be updated soon)


1.13.1 - 07 May 2006
--------------------
* Fix: [Bug #7375]  Crashes on Win98/ME


1.13.0 - 02 May 2006
--------------------
* New: Uthernet card support
  . Allows internet access when used with the Contiki OS
  . See: http://applewin.berlios.de/Uthernet.txt
* New: Floating bus support
  . Fixes the hang at Drol's cut-scene
  . Bob Bishop's Money Munchers is a little bit closer to working
* Change: Added support for SSC receive IRQ (eg. Z-Link)
* Fix: Checkerboard cursor back for //e mode
* Fix: [Bug #6778] enable harddisk not working in 1.12.9.1
* Fix: [Bug #6790] Right click menu stops working on drives
* Fix: [Bug #7231] AppleWin installed in path with spaces


1.12.9.1 - 10 Mar 2006
----------------------
* Right-Click on drive icon for disk popup menu. Options are:
        o Eject disk
        o Read only (write protection on.)
        o Read / Write (write protection off.)
        Note: If a file is read-only, the Read only option will be checked.
* Fixed invalid F7 opcode addressing mode, so Lock N' Chase is now playable.
* Video Blanking Timing now has preliminary support.
    i.e. Drol now longer stalls at the cutscene.
    Note: The VBL is not exact timing (yet), so some games like Karateka might exhibit a little choppiness.
* Debugger 2.5.0.16
        o New Command: #G, same as Apple "Monitor" go command, where # is an hex address.
            i.e. C600G
        o New Command: #L, same as Apple "Monitor" list command, where # is an hex address.
            i.e. 300L
        o New Command: //
        Starts a line comment anywhere in the line.
        o New Command: RUN "filename", to run a debugger script
        o New Command: ECHO ...
        Text may be quoted: ECHO "...text..."
        Echo the current line, since scripts don't echo their commands.
        o New Command: SH address ## [? ?? ##]
            You can now search memory!
            i.e.
            SH 800,8000 AD ? C0 // search for one byte gap, AD xx C0
            SH 800,8000 C030 // search for two bytes: 30 C0
        o Mini-Assembler preview:
        Note: None of the indexed/indirect modes are working (yet), expressions are not evaluated.
            usage: A address
            usage: A
            The assembler prompt is the '!' -- for your mini-assembler fans ;-)
            The format is: label mnemonic []
            To exit the assembler, press Enter without any input.
            The spacebar to execute the next instruction is disabled while in assembler mode. You must press space, if you don't wish to define a label.
        o Fixed Console sometimes not drawing.
        o Fixed UI bug: Memory View text over-writing buttons.
        o Changed BPX to now defaults to setting breakpoint at cursor.
        o Changed BP to now default to setting breakpoint at Program Counter (PC)
        o Added new color scheme: BW. (This used to be an alias for MONO before.)


1.12.9.0 - 25 Feb 2006
----------------------
- Moved source to BerliOS & released under GPL
- Debugger v2.4.2.16:
  + Breakpoint on memory address added: BPM address[,length]
  

1.12.8.0 - 22 Feb 2006
----------------------
- *** Major re-write of debugger by Michael Pohoreski ***
  . Debugger v2.4.2.15: Improvements & new features abound!
    + Syntax coloring, navigation, execution (eg. step-out), view memory as varying Ascii types
    + Symbol maintenance (main, user, source), source-level debugging, mini-calculator
    + Breakpoints: conditional on register, profiling + much more
  . See: http://applewin.berlios.de/Intro_To_New_Debugger.htm
- Fixed speaker volume not being set correctly at start-up
- Fixed emulation speed control (was only running at 1MHz)
- Fixed internal ADC: was flagged as write to memory
- Fixed internal BRK: only pushed PC+1, not PC+2 to stack
- Fixed CPU not getting properly reset (eg. SP) on Ctrl+Reset
- Changed attenuation on AY8910 outputs before mixing: MB: none (was 2/3), Phasor: still 2/3


1.12.7.2 - 25 Jan 2006
----------------------
- Fixed crash-bug in C++ 65C02 emu code for opcode $7C : JMP (ABS,X)
- Updated help file (by Brian Broker)
- Added ability to use Shift+Insert to paste from clipboard during emulation
- Added buttons to Config->Sound tab to select Mockingboard (s4 & s5), Phasor (s4) or none
- Removed keyboard buffer from Config->Input (this was redundant from 1.12.7.0)
- Fixed speaker click (eg. when selecting disk image)
- Added check to prevent loading old & incompatible 6502 DLLs (caused random 6502 crashes to monitor)
- Added support for AE's RAMWorks III, which adds up to 8MB (cmd-line switch only):
  . -r <#pages>  : where #pages = [1..127], each page is 64KB.
. NB. The following aren't saved out to the save-state file yet:
  . Phasor card  (only the Mockingboards are)
  . RAMWorks card

1.12.7.1 - 08 Jan 2006
----------------------
- Fixed cmd-line switches -d1/-d1 to work with filenames with spaces
- Reset: Init Phasor back to Mockingboard mode
- Benchmark button acts immediately
- Fixes to speaker emulation introduced in 1.12.7.0
- Adjusted speaker freq to work better with MJ Mahon's RT.SYNTH.dsk
- Fixed Bxx; ABS,X; ABS,Y; (IND),Y opcodes: take variable cycles depending on branch taken & page crossed


1.12.7.0 - 30 Dec 2005
----------------------
- Public release
- Fixed Apple][+ ROM (IRQ vector was vectoring to $FF59/OLDRST)
- Added cmd-line switches (-f, -d1, -d2)
  . -f           : full-screen
  . -dn <image>  : Load a disk image into a drive. A disk in drive-1 will force a reboot.
- Extended 6502 debugger (M1, M2, P0,...P4)
  . Mn <addr>    : Memory window 1/2
  . Pn <zp-addr> : Display a zero-page pointer
  . Extended memory-dump to output SY6522/AY8910 regs with SYn/AYn, eg: M1 AY0
  . Added support for ACME symbol files
- Phasor support (defaulting to Mockingboard mode, available in slots 4 & 5)
- Display updated at ~60Hz (instead of 20Hz)
- Emulation broken into 1ms units (instead of video-frame units)
- Uses internal CPU emulator instead of DLLs (DLLs to be phased out)


1.12.6.1 - 23 Apr 2005
----------------------
- Added support for Votrax speech: emulated using SSI263 phonemes
- Added joystick x/y trim control to Input property sheet
- Added support for double-lores graphics
- Updated Applewin.chm
- Load state: F12 nows works like Ctrl-F12


1.12.6.0 - 19 Mar 2005
----------------------
- Public release


1.12.5.5 - 11 Mar 2005
----------------------
- Added support for clipboard paste.
- Fixed slow Disk][ when Mockingboard disabled problem.
- Fixed flickering mouse pointer problem. 


1.12.5.4 - 11 Feb 2005
----------------------
- Added support for 2 HDDs (HDV images) from slot7
- Fixed Disk-swap bug.


1.12.5.3 - 4 Feb 2005
----------------------
- Internal


1.12.5.2 - 4 Feb 2005
----------------------
- Moved 'Monochrome Color' from main window to Config dialog
- Changed old 'Monochrome Color' button to 'Disk Swap' button (bitmap provided by The Rink).


1.12.5.1 - 24 Jan 2005
----------------------
- Rebuilt with new CHARSET4.bmp from "The Rink"


1.12.5.0 - 11 Dec 2004
----------------------
- Added browse dialogs for F11 & Ctrl-F12.


1.12.4.4 - 28 Nov 2004
----------------------
- Changed Configuration Dialog to Property Sheet Pages.
- Added Volume control for Speaker & Mockingboard.
- Added control for keyboard buffer.
- Added Save State page.


1.12.4.3 - 13 Nov 2004
----------------------
- Fixed problem with jerky graphics when in mixed HGR/TEXT (Olympic Decathlon).
- Fixed sudden burst of 'full speed' after unpausing.
- Fixed joystick emulation problem (Championship Lode Runner & Boulderdash).
- Fixed FLASH problem when nothing changing on TEXT screen.
- Fixed problem with internal 6502 emu's SBC opcode when in BCD mode (Dino Eggs).
- Fixed Pro Mockingboard compatiblity problem (Pro-MB accesses are now ignored).
- Added emulator save-state (Save=F11, Load=Ctrl+F12).


1.12.4.2 - 09 Nov 2004
----------------------
- Internal


1.12.4.1 - 14 Sep 2004
----------------------
- Fixed "CPU usage 100%" problem.
- Switch MB output from dual-mono to stereo.
- Relaxed TIMER1's max freq from ~62Hz (period=0x4000) to ~83Hz (period=0x3000).
- Fixed FLASH problem when in monochrome mode.


1.12.4.0 - 01 Aug 2004
----------------------
- Switched to MAME's AY8910 emulation
- Added support for SSI263 speech chip on Mockingboard
- Ctrl+Reset now resets MB
- Key presses: 2 buffers. Fixes problem where key presses are missed on faster PCs.
- Added FLASH support
- Switched Speaker to use DirectX
- Rebuilt using DirectX 9.0b library
- Removed AppleWin calibration when starting a new version
- Fixed 6502 emulation cycle-count inaccuracies, resulting in:
  . Precise analogue joystick support (Rescue Raiders' joystick support now works)
  . Precise Apple speaker
- Emulation speed control now works when using Mockingboard
- Full speed (Scroll-lock) mutes all sound (Speaker,Mockingboard)
- Fixed DELREG.INF
- Reset now switches Alternate char set off
- PC's delete key maps to Apple's DEL key
- Fixed characters: '6', '|', '_'


1.12.3 - 04 Jan 2004
--------------------
Changes:
- Added Thomas Stahl's TV emulation mode: "Color (TV emulation)".
  Tested with Karateka, Mindshadow.
	"As you probably know, many of the higher sophisticated Apple ][+
	games made use of the blurr-effekt that color TV-monitors had on
	patterns consisting of horizontal color stripes. Using this effect it
	was possible to produce *solid* mix colors like grey, purple, pink,
	yellow and aquamarine even in the 2+ *hi-res mode*."
- Included Thomas Stahl's adjusted hires colors:
	He "adjusted the hires colors for a more realistic look -
	at least in comparison with an Apple PAL-System."
- Changed wording in Config dialog: from "Color (optimized)" to "Color (text optimized)".
- Fixed Config dialog (speed settings were misplaced in 1.12.2).
- Fixed Joystick 2 for Mario Bros: Now when in dual-joystick mode, 2nd joystick
  button controls both switches #1 & #2 as one.
- Fixed Mockingboard IRQ frequency problem (Ultima 4 & 5 tunes now play at correct rate).
- Added Applewin.chm to release zip. (NB. This hasn't changed from 1.10.4)


1.12.2 - 05 Jul 2003
--------------------
Changes:
- Added support for 2nd joystick.
  If the 2nd Apple joystick is enabled, then the buttons are re-configured:
  - Joystick 1 controls only button #0 (ie. not button #1 too)
  - Joystick 2 controls only button #1 (ie. not button #2)
  This is so that player 1 can't affect player 2's controls.
  So there is no way to control button #2 via a joystick. I don't think this will be a problem.
  Of course Left Alt, Right Alt and Shift still activate the 3 buttons.
  NB. Disable 2nd joystick if playing a 1 player game that requires the use of buttons 0 and 1.
  Tested with Archon I, Archon II and One-on-one.


1.12.1 - 24 Nov 2002
--------------------
Changes:
- Changed tone waveform from orthodox square-wave to a more logarithm shape,
  based on real MB waveform analysis. This is by no means perfect, but in my
  opinion gives the tones more musical quality.
- Added MB enable/disable switch to Configuration dialog.
- Added simple logging support. If AppleWin is started from the command line
  (DOS box) with the '-l' switch, then a text log file, AppleWin.log, will be
  generated. This can hopefully be used to diagnose problems some users are having.


1.12.00 - 17 Nov 2002
---------------------
- Initial release.
- Supports 2 Mockingboard cards in slots 4 & 5
- 12 voices and noise supported using DirectX 8.1.
- Tested on Win98, 2000 and XP platforms.
